How to use this 3D view
- Start the guided lesson — the side panel opens on step one. Each step sets up the model and names the components in view; move on with Next or step back with Back.
- Inspect the parts in view — the buttons under each lesson step list the components that step is about; choose one to highlight it in the model and read what it does in the panel below.
- Orbit and zoom — drag the model to rotate around it, scroll or pinch to zoom into details, and use Reset view on the model to return to the starting angle.
- Switch to Explore freely — when the lesson ends, switch the panel to explore mode for the complete parts list and the model steps for the fore peak.
- Use View options — labels, exploded view, pan and full screen are always visible in the toolbar above the model.
- Read the topic — open Dynamic Hull Stresses: Panting & Pounding for theory, sketches and oral-prep questions.
What's inside this 3D model
- Shell plating & stem bar
- Collision bulkhead
- Panting stringers & beams
- Breast hooks
- Side frames
- Panting & pounding simulations
About: Fore Peak in 3D
Orbit the fore peak, isolate any component and switch on the Panting and Pounding loads to watch how the steel skeleton fights back.
This free interactive 3D view of the fore peak is built for marine engineers, cadets and seafarers preparing for orals — open it on any device, work through the guided lesson, explore all 6 labelled parts, and then continue with the full Dynamic Hull Stresses: Panting & Pounding topic.
FAQs
What does the guided lesson in this fore peak 3D view cover?
The lesson walks you through the fore peak in short steps — Shell plating & stem bar, Collision bulkhead, Panting stringers & beams and more. Each step sets up the model, names the components in view and explains what they do, so you learn the arrangement before you explore it freely.
Can I explore the fore peak instead of following the lesson?
Yes. Switch the side panel to “Explore freely” for the complete parts list and the model steps for this fore peak. Labels, exploded view, pan and full screen are always visible in the “View options” toolbar above the model, and Reset view stays on the model itself.
Do I need to install anything to open the Fore Peak 3D model?
No. The Fore Peak 3D view runs entirely in your browser with WebGL — open the page on a phone, tablet or desktop, drag to orbit and pinch or scroll to zoom.
Where can I learn the theory behind the fore peak?
Open the linked topic “Dynamic Hull Stresses: Panting & Pounding” below the viewer for the full explanation, sketches, oral-prep questions and related 3D simulations.